https://doi.org/10.4081/fire.2018.42
Effect of radiation inside square hollow section under moderate non-symmetric fire
Accepted: 27 July 2018
APPENDIX: 176
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
The temperature calculation of hollow steel sections at elevated temperatures is a well-documented and standard procedure. Through this standard procedure, the temperature can be calculated by assuming a uniform gas temperature all around the section, which is called a symmetric fire in this paper. Embedding in surrounding structures or connecting to another steel member results in non-symmetric heat distribution in the member. This non-symmetricity of the surrounding temperature may cause surface- to-surface heat radiation inside the member, thus affecting the steel section temperature distribution. This effect is considered in this paper by adopting analytical and finite element method analysis.
Supporting Agencies
TTY FoundationHow to Cite
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- João Paulo C. Rodrigues, LuÃs LaÃm, Helder D. Craveiro, Structural fire performance of restrained composite columns made of concrete-filled square and circular hollow sections , Fire Research: Vol. 1 No. 1 (2017)
- Abdelkadir Fellouh, Nourredine Benlakehal, Paulo Piloto, Ana Ramos, LuÃs Mesquita, Load carrying capacity of partially encased columns for different fire ratings , Fire Research: Vol. 1 No. 1 (2017)
- Brahim Lamri, LuÃs Mesquita, Kada Abdelhak, Paulo Piloto, Behavior of cellular beams protected with intumescent coatings , Fire Research: Vol. 1 No. 1 (2017)
- Fernando C.T. Gomes, João Paulo C. Rodrigues, On the ductility of bolted steel joints at ambient and elevated temperatures , Fire Research: Vol. 1 No. 1 (2017)
- Hélder D. Craveiro, João Paulo C. Rodrigues, LuÃs M. LaÃm, Buckling behavior of cold-formed steel columns at both ambient temperature and simulated fire conditions , Fire Research: Vol. 1 No. 1 (2017)
- Ana Belén Ramos-Gavilán, Paulo Piloto, LuÃs Mesquita, Analytical study on lateral torsional buckling of partially encased beams under ISO834 fire exposure , Fire Research: Vol. 1 No. 1 (2017)
- Saket Singh, Sumit Shivani, Sudheer Siddapureddy, Siddini Venkatesh Prabhu, Performance of intumescent coatings in cone calorimeter and open pool fires , Fire Research: Vol. 3 No. 1 (2019)
- Susana N. Espinosa, Rossana C. Jaca, Luis A. Godoy, Thermal and structural analysis of a fuel storage tank under an adjacent pool fire , Fire Research: Vol. 2 No. 1 (2018)
- Dalilah Pires, Rafael C. Barros, Ricardo A. M. Silveira, Ãgor J. M. Lemes, Paulo A. S. Rocha, Thermo-structural analysis of reinforced concrete beams , Fire Research: Vol. 3 No. 1 (2019)
You may also start an advanced similarity search for this article.