https://doi.org/10.4081/bse.89
Swiss 3R Competence Centre: Promoting the 3Rs implementation
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This contribution describes the history and activity of the Swiss 3R Competence Centre (3RCC), which has been founded in 2018. Among the most relevant activities, a call for project proposals on 3Rs was launched in 2018, with 47 proposals received for selection, followed by a call for nominations for a 3Rs award, which will be announced in Sept. 2019. Implementation of a 3Rs educational program has also been carried out since 2018. The 3RCC is also developing an e-Learning module to promote the implementation of alternatives to animal testing. Finally, the centre activity is addressed to help fostering good experimental design and biostatistics practices and support.
How to Cite
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Giorgia Cerqueni, Annachiara Scalzone, Xiao Nong Wang, Caterina Licini, Kenny Dalgarno, Ana Marina Ferreira-Duarte, Piergiorgio Gentile, Monica Mattioli Belmonte, An osteochondral bio-engineered model to in vitro mimicking osteoarthritis , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Andrea Cacciamali, Chiara Romano, Martina Angela Checco, Riccardo Villa, Detection of pathogens from environmental samples for the evaluation of the health status of laboratory animals , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Maria Sampieri, Erika Molica Colella, Silvia Dotti, Chilled storage of zebrafish embryos: Development of an efficient protocol , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Marco Campisi, Sharon W. L. Lee, Tatsuya Osaki, Luca Possenti, Clara Mattu, Giulia Adriani, Valeria Chiono, Roger D. Kamm, In vitro microfluidic modelling of the human blood-brain-barrier microvasculature and testing of nanocarrier transport , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Paola Petrini, Daniela Pacheco, Francesco Briatico Vangosa, Cosmin S. Butnarasu, Livia Visai, Orietta Monticelli, Laura Pastorino, Sonja Visentin, Hydrogel-based platforms to mimic in vivo drug diffusion: A multicenter research , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Stefania Blasa, Valentina Pastori, Alessia D'Aloia, Marzia M. Lecchi, Differentiated neuroblastoma F-11 cells as an alternative in vitro model to dorsal root ganglion neurons , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Elena Torta, Giuseppe Carlo Alp Caridi, Claudio Chiastra, Diego Gallo, Umberto Morbiducci, A compact in vitro test bench for cardiovascular flow analysis , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michele Panzera, Neurophysiological models of animal sentience , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Simona Villata, Lucia Napione, Désirée Baruffaldi, Christine Nardini, Francesca Frascella, Fabrizio Pirri, Electrostimulation of a 3D in vitro skin model to activate wound healing , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Viola Sgarminato, Chiara Tonda-Turo, Gianluca Ciardelli, 3D in vitro model of the pancreatic acino-ductal unit through additive manufacturing technology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
You may also start an advanced similarity search for this article.
