https://doi.org/10.4081/bse.89
Swiss 3R Competence Centre: Promoting the 3Rs implementation
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This contribution describes the history and activity of the Swiss 3R Competence Centre (3RCC), which has been founded in 2018. Among the most relevant activities, a call for project proposals on 3Rs was launched in 2018, with 47 proposals received for selection, followed by a call for nominations for a 3Rs award, which will be announced in Sept. 2019. Implementation of a 3Rs educational program has also been carried out since 2018. The 3RCC is also developing an e-Learning module to promote the implementation of alternatives to animal testing. Finally, the centre activity is addressed to help fostering good experimental design and biostatistics practices and support.
How to Cite
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Viola Sgarminato, Chiara Tonda-Turo, Gianluca Ciardelli, 3D in vitro model of the pancreatic acino-ductal unit through additive manufacturing technology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Danila Cianciosi, Lucia Regolo, Maurizio Battino, Francesca Giampieri, Effect of manuka honey on 5-fluorouracil chemosensitivity in colonspheres enriched with cancer stem (-like) cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Andrea Cacciamali, Chiara Romano, Martina Angela Checco, Riccardo Villa, Detection of pathogens from environmental samples for the evaluation of the health status of laboratory animals , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Erika Molica Colella, Silvia Dotti, Riccardo Villa, Guerino Lombardi, Massimo Amadori, Application of two in vitro methods for the toxicity test of autogenous vaccines , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Gustavo A. Gonzalez, Annalisa Chiappone, Kurt Dietliker, Pirri C. Fabrizio, Ignazio Roppolo, Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Stefania Blasa, Valentina Pastori, Alessia D'Aloia, Marzia M. Lecchi, Differentiated neuroblastoma F-11 cells as an alternative in vitro model to dorsal root ganglion neurons , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Alessio Malacrida, Mirko Rivara, Omar Ben Mariem, Alessandro Di Domizio, Giacomo Cislaghi, Mariarosaria Miloso, Valentina Zuliani, Gabriella Nicolini, Innovative 3D proteome-wide scale identification of ALKBH5 target for MV1035 small molecule able to reduce migration and invasiveness in U87 glioblastoma cell lines by SPILLO-PBSS , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Maria Sampieri, Erika Molica Colella, Silvia Dotti, Chilled storage of zebrafish embryos: Development of an efficient protocol , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Chiara Romano, Andrea Cacciamali, Silvia Dotti, Riccardo Villa, Health monitoring program for the control of laboratory animal diseases , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Giorgia Cerqueni, Annachiara Scalzone, Xiao Nong Wang, Caterina Licini, Kenny Dalgarno, Ana Marina Ferreira-Duarte, Piergiorgio Gentile, Monica Mattioli Belmonte, An osteochondral bio-engineered model to in vitro mimicking osteoarthritis , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
You may also start an advanced similarity search for this article.
