https://doi.org/10.4081/bse.89
Swiss 3R Competence Centre: Promoting the 3Rs implementation
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
This contribution describes the history and activity of the Swiss 3R Competence Centre (3RCC), which has been founded in 2018. Among the most relevant activities, a call for project proposals on 3Rs was launched in 2018, with 47 proposals received for selection, followed by a call for nominations for a 3Rs award, which will be announced in Sept. 2019. Implementation of a 3Rs educational program has also been carried out since 2018. The 3RCC is also developing an e-Learning module to promote the implementation of alternatives to animal testing. Finally, the centre activity is addressed to help fostering good experimental design and biostatistics practices and support.
How to Cite
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Similar Articles
- Erica Zucchetti, Leonardo Ling, Daniela Monti, Patrizia Chetoni, Silvia Tampucci, Susi Burgalassi, Polyvinyl alcohol/cellulose hydrogel as possible corneal stroma substitute in drug permeation tests , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Roberta Nossa, Joana Costa, Ludovica Cacopardo, Arti Ahluwalia, Engineering a dynamic model of the alveolar interface for the study of aerosol deposition , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Cecile Valsecchi, Francesca Grisoni, Viviana Consonni, Davide Ballabio, Roberto Todeschini, Nuclear receptor modulators: Catching information by machine learning , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Piera Mancini, Ermes Botte, Chiara Magliaro, Arti Ahluwalia, Toward scalable in vitro models: a novel experimental and computational pipeline for the identification of cellular metabolic parameters , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Erica Zucchetti, Daniela Monti, Patrizia Chetoni, Silvia Tampucci, Susi Burgalassi, Reconstituted epithelial tissues and native cornea: A comparison of the influence of surfactants on ocular permeability , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Ermes Botte, Pietro Vagaggini, Joana Costa, Lara Faccani, Ilaria Zanoni, Anna Costa, Arti Ahluwalia, A novel in silico tool for dose assessment in cell culture nanotoxicology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- B. Masante, S. Gabetti, D. Baruffaldi, S. Villata, A. Sanginario, A. L. Audenino, F. Frascella, D. Massai, Biomimetic air-liquid interface milli-bioreactor for skin tissue engineering applications , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- M. Spedicati, A. Zoso, I. Carmagnola, V. Chiono, In vitro model of the human esophageal epithelium by tissue engineering tools , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Maurizio Lodi Rizzini, Paola Tasso, Anastasios Raptis, Miltiadis Matsagkas, Diego Gallo, Michalis Xenos, Umberto Morbiducci, Patient-specific modelling for the assessment of the hemodynamics risk of failure in endovascular aneurysm repair , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Monica Boffito, Arianna Grivet Brancot, Ornella Lima, Simona Bronco, Susanna Sartori, Gianluca Ciardelli, Injectable thermosensitive gels for the localized and controlled delivery of biomolecules in tissue engineering/regenerative medicine , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
