https://doi.org/10.4081/bse.188
Simulated models for testing performance of a radiofrequency ablation device for spine tumors
Published: 29 September 2021
Abstract Views: 379
PDF: 201
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Effectiveness of simulation models to assess performance a radiofrequency tumor ablation device.
Greenberg A, Weyel B, Sosna J, et al. The distribution of heat in bone during radiofrequency ablation of an ex vivo bovine model of osteoid osteoma. Bone Joint J 2014;96-B:677-83.
DOI: https://doi.org/10.1302/0301-620X.96B5.32822
How to Cite
Rusinà, F., Ravizza, A., Pasquino, S., & Muto, M. (2021). Simulated models for testing performance of a radiofrequency ablation device for spine tumors. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.188
Copyright (c) 2021 The Authors
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Licia Di Pietro, Alice Ravizza, Giovanni Vozzi, Andrés Diaz Lantada, Arti Ahluwalia, Carmelo De Maria, European regulatory framework for the clinical translation of bioprinted scaffolds and tissues , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
Similar Articles
- Salvatore Simmini, Allen C. Eaves, Sharon A. Louis, Wing Chang, Human pluripotent stem cell-derived organoids and their potential to reduce the use of animal models in research , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Paolo Milazzo, Roberta Gori, Alessio Micheli, Lucia Nasti, Marco Podda, In silico modeling of biochemical pathways , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Flaminia Aliberti, Lorenza Rinvenuto, Giada Loi, Laura Benedetti, Franca Scocozza, Flavio Lorenzo Ronzoni, Maurilio Sampaolesi, Gabriella Cusella, Michele Conti, Gabriele Ceccarelli, Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Désirée Baruffaldi, Marta Canta, Candido Fabrizio Pirri, Francesca Frascella, Development of in vitro 3D culture system to mimic lung cancer tissue , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Daniele Bianchi, Daniele Bissacco, Maurizio Domanin, Santi Trimarchi, Rodrigo Romarowski, Stefania Marconi, Ferdinando Auricchio, Michele Conti, Coupling in silico and ex vivo porcine model for the evaluation of biomechanical impact of TEVAR , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Anna M. Bassi, Sara Tirendi, Sonia Scarfì, Mario Passalacqua, Vanessa Almonti, Stefania Vernazza, A millifluidic-based 3D-platform as a useful tool for the efficacy of glaucoma therapeutic strategies , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Stefania Forciniti, Marta Cavo, Ilaria Dando, Elisa Dalla Pozza, Marta Palmieri, Loretta L. del Mercato, Promising 3D in vitro models for studying tumour heterogeneity and testing novel therapeutic approaches in pancreatic cancer , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Irene Carmagnola, Tiziana Nardo, Francesca Boccafoschi, Valeria Chiono, Layer-by-layer coating of stainless steel plates mediated by surface priming treatment to improve antithrombogenic properties , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
