https://doi.org/10.4081/bse.168
Bioprinting for osteosarcoma model: Methodological aspects and experimental applications
Published: 29 September 2021
Abstract Views: 943
PDF: 298
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
The study aims at using the bioprinting technique to create an in vitro 3D construct of osteosarcoma, as an alternative model for studies related to Boron Neutron Capture Therapy (BNCT).
How to Cite
Delgrosso, E., Sarcinelli, G. M., Riva, F., Riva, F., Scocozza, F., Conti, M., … Ferrari, C. (2021). Bioprinting for osteosarcoma model: Methodological aspects and experimental applications. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.168
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Flaminia Aliberti, Lorenza Rinvenuto, Giada Loi, Laura Benedetti, Franca Scocozza, Flavio Lorenzo Ronzoni, Maurilio Sampaolesi, Gabriella Cusella, Michele Conti, Gabriele Ceccarelli, Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Daniele Bianchi, Daniele Bissacco, Maurizio Domanin, Santi Trimarchi, Rodrigo Romarowski, Stefania Marconi, Ferdinando Auricchio, Michele Conti, Coupling in silico and ex vivo porcine model for the evaluation of biomechanical impact of TEVAR , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Stefania Blasa, Valentina Pastori, Alessia D'Aloia, Marzia M. Lecchi, Differentiated neuroblastoma F-11 cells as an alternative in vitro model to dorsal root ganglion neurons , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Francesco Bacchi, Azzurra Sargenti, Francesco Musmeci, Simone Pasqua, Simone Bonetti, Daniele Gazzola, Domenico Andrea Cristaldi, A viability study of 3D tumor spheroids after their mass-density characterization via an innovative flow-based biophysical method , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Susi Burgalassi, Erica Zucchetti, Eleonora Terreni, Daniela Monti, Silvia Tampucci, Patrizia Chetoni, Reconstituted epithelial corneal tissues for evaluation of drug delivery , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Flaminia Aliberti, Lorenza Rinvenuto, Giada Loi, Laura Benedetti, Franca Scocozza, Flavio Lorenzo Ronzoni, Maurilio Sampaolesi, Gabriella Cusella, Michele Conti, Gabriele Ceccarelli, Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Stefano Gabetti, Giovanni Putame, Federica Montrone, Giuseppe Isu, Anna Marsano, Alberto Audenino, Diana Massai, Versatile electrical stimulator for providing cardiac-like electrical impulses in vitro , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Eleonora Messuti, Martina Giambra, Serena Redaelli, Andrea Di Cristofori, Carlo Giussani, Angela Bentivegna, V-ATPase as a mediator of treatment resistance in Glioblastoma Multiforme: an in vitro study to investigate new therapeutic strategies , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Nicolò Cacocciola, Matteo Parmeggiani, Matteo Segantini, Alessio Verna, Désirée Baruffaldi, Simona Villata, Francesca Frascella, Simone Luigi Marasso, Giancarlo Canavese, Matteo Cocuzza, Fabrizio Candido Pirri, A programmable culture platform for stimulation and in situ sensing of lung epithelial cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Deyanira Contartese, Francesca Salamanna, Veronica Borsari, Stefania Pagani, Maria Sartori, Lucia Martini, Giovanni Barbanti Brodano, Alessandro Gasbarrini, Milena Fini, Development and characterization of a novel human 3D model of bone metastasis from breast carcinoma in vitro cultured , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Erika Molica Colella, Silvia Dotti, Riccardo Villa, Guerino Lombardi, Massimo Amadori, Application of two in vitro methods for the toxicity test of autogenous vaccines , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
