https://doi.org/10.4081/bse.168
Bioprinting for osteosarcoma model: Methodological aspects and experimental applications
Published: 29 September 2021
Abstract Views: 943
PDF: 298
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
The study aims at using the bioprinting technique to create an in vitro 3D construct of osteosarcoma, as an alternative model for studies related to Boron Neutron Capture Therapy (BNCT).
How to Cite
Delgrosso, E., Sarcinelli, G. M., Riva, F., Riva, F., Scocozza, F., Conti, M., … Ferrari, C. (2021). Bioprinting for osteosarcoma model: Methodological aspects and experimental applications. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.168
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Flaminia Aliberti, Lorenza Rinvenuto, Giada Loi, Laura Benedetti, Franca Scocozza, Flavio Lorenzo Ronzoni, Maurilio Sampaolesi, Gabriella Cusella, Michele Conti, Gabriele Ceccarelli, Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Daniele Bianchi, Daniele Bissacco, Maurizio Domanin, Santi Trimarchi, Rodrigo Romarowski, Stefania Marconi, Ferdinando Auricchio, Michele Conti, Coupling in silico and ex vivo porcine model for the evaluation of biomechanical impact of TEVAR , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Melania Maglio, Matilde Tschon, Stefania Pagani, Leonardo Vivarelli, Marco Govoni, Martina Rocchi, Alessandro Mazzotta, Lucia Martini, Dante Dallari, Milena Fini, Human tissue culture of osteochondral defect: An advanced in vitro model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Roberta Nossa, Joana Costa, Ludovica Cacopardo, Arti Ahluwalia, Engineering a dynamic model of the alveolar interface for the study of aerosol deposition , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Paola Petrini, Daniela Pacheco, Francesco Briatico Vangosa, Cosmin S. Butnarasu, Livia Visai, Orietta Monticelli, Laura Pastorino, Sonja Visentin, Hydrogel-based platforms to mimic in vivo drug diffusion: A multicenter research , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Marta Canta, Désirée Baruffaldi, Ignazio Roppolo, Annalisa Chiappone, Candido F. Pirri, Francesca Frascella, 3D printed microfluidic devices for cell culture , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Zeinab El Rashed, Hala Khalife, Adriana Voci, Elena Grasselli, Laura Canesi, Ilaria Demori, Use of an in vitro model of hepatic steatosis for studying the anti-oxidant and antisteatotic effects of fucoidan polysaccharides , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Giuseppe Valerio De Gaetano, Germana Lentini, Roberta Galbo, Francesco Coppolino, Agata Famà, Giuseppe Teti, An in vitro enterocyte cell-like model to study Group B streptococci internalization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Désirée Baruffaldi, Marta Canta, Candido Fabrizio Pirri, Francesca Frascella, Development of in vitro 3D culture system to mimic lung cancer tissue , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ludovica Cacopardo, Joana Costa, Nicole Guazzelli, Serena Giusti, Sandro Meucci, Alessandro Corti, Giorgio Mattei, Arti Ahluwalia, Real-time cellular impedance monitoring and imaging in a dual-flow bioreactor , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Martina Brofiga, Marietta Pisano, Mariateresa Tedesco, Francesca Callegari, Paolo Massobrio, 3F(eature)s model: modularity, heterogeneity and three-dimensionality to design in vitro neuronal model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Anna Maria Bassi, Teaching and training in substitutive approaches to animal testing: Commitment of the University of Genoa , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
