https://doi.org/10.4081/bse.161
3D printed microfluidic devices for cell culture
Published: 29 September 2021
Abstract Views: 742
PDF: 330
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
A successful application of the 3D printed materials in the biomedical field requires extensive studies to ensure their biocompatibility at every step of the process. Here, different components suitable for cell applications, including a microfluidic device, were 3D printed using common resins and a deep analysis of their biocompatibility and post printed protocols was conducted.
Zhang J, Hu Q, Wang S, et al. Digital light processing based three-dimensional printing for medical applications. Int J Bioprint 2019;6:242.
Gonzàlez G, Baruffaldi D, Martinengo C, et al. Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing. Nanomaterials 2020;10:1788.
Lee PJ, Ghorashian N, Gaige TA, Hung PJ. Microfluidic System for Automated Cell-based Assays. JALA Charlottesv Va 2007;12:363-7.
How to Cite
Canta, M., Baruffaldi, D., Roppolo, I., Chiappone, A., Pirri, C. F., & Frascella, F. (2021). 3D printed microfluidic devices for cell culture . Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.161
Copyright (c) 2021 The Authors
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Gustavo A. Gonzalez, Annalisa Chiappone, Kurt Dietliker, Pirri C. Fabrizio, Ignazio Roppolo, Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michael Zanon, Désirée Baruffaldi, Marco Sangermano, Candido Fabrizio Pirri, Francesca Frascella, Annalisa Chiappone, Visible light-induced cross-linking of unmodified gelatin with PEGDA for DLP-3D printable hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simona Villata, Lucia Napione, Désirée Baruffaldi, Christine Nardini, Francesca Frascella, Fabrizio Pirri, Electrostimulation of a 3D in vitro skin model to activate wound healing , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Nicolò Cacocciola, Matteo Parmeggiani, Matteo Segantini, Alessio Verna, Désirée Baruffaldi, Simona Villata, Francesca Frascella, Simone Luigi Marasso, Giancarlo Canavese, Matteo Cocuzza, Fabrizio Candido Pirri, A programmable culture platform for stimulation and in situ sensing of lung epithelial cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianluca Palmara, Alessandro Chiadò, Annalisa Chiappone, Fabrizio Pirri, Ignazio Roppolo, Francesca Frascella, Angiogenesis biomarkers detection on a polymeric 3D printed device , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Désirée Baruffaldi, Marta Canta, Candido Fabrizio Pirri, Francesca Frascella, Development of in vitro 3D culture system to mimic lung cancer tissue , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Matteo Segantini, Matteo Parmeggiani, Alberto Ballesio, Francesca Frascella, Gianluca Palmara, Matteo Cocuzza, Candido Fabrizio Pirri, Simone Luigi Marasso, Design of a contamination-free microfluidic device for Electrolyte-Gated Organic Field-Effect Transistor (EGOFET) biosensors , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Camilla Noè, Chiara Tonda-Turo, Annalisa Chiappone, Marco Sangermano, Minna Hakkarainen, Light processable starch hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Stefania Blasa, Valentina Pastori, Alessia D'Aloia, Marzia M. Lecchi, Differentiated neuroblastoma F-11 cells as an alternative in vitro model to dorsal root ganglion neurons , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Giovanni Nicoletti, Marco Saler, Laura Villani, Agnese Rumolo, Marco Mario Tresoldi, Angela Faga, Platelet rich plasma enhancement of skin regeneration in an ex vivo human experimental model , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Giorgia Cerqueni, Annachiara Scalzone, Xiao Nong Wang, Caterina Licini, Kenny Dalgarno, Ana Marina Ferreira-Duarte, Piergiorgio Gentile, Monica Mattioli Belmonte, An osteochondral bio-engineered model to in vitro mimicking osteoarthritis , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Francesca Nocchi, Patrizia Urciuoli, Silvia Ursino, Elisa Biagi, Simone Lapi, Pisa Biobank and Tuscany Regional Biorepository , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- G. Cattelan, G. Gentile, C. Volani, L. S. Frommelt, A. Lavdas, L. Foco, M. De Bortoli, C. Altomare, L. Barile, S. Zacchigna, P. P. Pramstaller, I. Pichler, A. Zanon, A. Rossini, A novel human iPSC-based co-culture model to study neurocardiac interaction in vitro , Biomedical Science and Engineering: Vol. 5 No. 1 (2024)
You may also start an advanced similarity search for this article.
