https://doi.org/10.4081/bse.161
3D printed microfluidic devices for cell culture
Published: 29 September 2021
Abstract Views: 742
PDF: 330
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
A successful application of the 3D printed materials in the biomedical field requires extensive studies to ensure their biocompatibility at every step of the process. Here, different components suitable for cell applications, including a microfluidic device, were 3D printed using common resins and a deep analysis of their biocompatibility and post printed protocols was conducted.
Zhang J, Hu Q, Wang S, et al. Digital light processing based three-dimensional printing for medical applications. Int J Bioprint 2019;6:242.
Gonzàlez G, Baruffaldi D, Martinengo C, et al. Materials Testing for the Development of Biocompatible Devices through Vat-Polymerization 3D Printing. Nanomaterials 2020;10:1788.
Lee PJ, Ghorashian N, Gaige TA, Hung PJ. Microfluidic System for Automated Cell-based Assays. JALA Charlottesv Va 2007;12:363-7.
How to Cite
Canta, M., Baruffaldi, D., Roppolo, I., Chiappone, A., Pirri, C. F., & Frascella, F. (2021). 3D printed microfluidic devices for cell culture . Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.161
Copyright (c) 2021 The Authors
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Gustavo A. Gonzalez, Annalisa Chiappone, Kurt Dietliker, Pirri C. Fabrizio, Ignazio Roppolo, Light-based 3D printing of functional polydimethylsiloxane- based microfluidic chips , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michael Zanon, Désirée Baruffaldi, Marco Sangermano, Candido Fabrizio Pirri, Francesca Frascella, Annalisa Chiappone, Visible light-induced cross-linking of unmodified gelatin with PEGDA for DLP-3D printable hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simona Villata, Lucia Napione, Désirée Baruffaldi, Christine Nardini, Francesca Frascella, Fabrizio Pirri, Electrostimulation of a 3D in vitro skin model to activate wound healing , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Nicolò Cacocciola, Matteo Parmeggiani, Matteo Segantini, Alessio Verna, Désirée Baruffaldi, Simona Villata, Francesca Frascella, Simone Luigi Marasso, Giancarlo Canavese, Matteo Cocuzza, Fabrizio Candido Pirri, A programmable culture platform for stimulation and in situ sensing of lung epithelial cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianluca Palmara, Alessandro Chiadò, Annalisa Chiappone, Fabrizio Pirri, Ignazio Roppolo, Francesca Frascella, Angiogenesis biomarkers detection on a polymeric 3D printed device , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Désirée Baruffaldi, Marta Canta, Candido Fabrizio Pirri, Francesca Frascella, Development of in vitro 3D culture system to mimic lung cancer tissue , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Matteo Segantini, Matteo Parmeggiani, Alberto Ballesio, Francesca Frascella, Gianluca Palmara, Matteo Cocuzza, Candido Fabrizio Pirri, Simone Luigi Marasso, Design of a contamination-free microfluidic device for Electrolyte-Gated Organic Field-Effect Transistor (EGOFET) biosensors , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Camilla Noè, Chiara Tonda-Turo, Annalisa Chiappone, Marco Sangermano, Minna Hakkarainen, Light processable starch hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Claudio Conci, Emanuela Jacchetti, Tommaso Zandrini, Laura Sironi, Maddalena Collini, Giuseppe Chirico, Giulio Cerullo, Roberto Osellame, Manuela Teresa Raimondi, Quantification of the foreign body reaction by means of a miniaturized imaging window for intravital nonlinear microscopy , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Ludovica Cacopardo, Joana Costa, Nicole Guazzelli, Serena Giusti, Sandro Meucci, Alessandro Corti, Giorgio Mattei, Arti Ahluwalia, Real-time cellular impedance monitoring and imaging in a dual-flow bioreactor , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Alessio Malacrida, Mirko Rivara, Omar Ben Mariem, Alessandro Di Domizio, Giacomo Cislaghi, Mariarosaria Miloso, Valentina Zuliani, Gabriella Nicolini, Innovative 3D proteome-wide scale identification of ALKBH5 target for MV1035 small molecule able to reduce migration and invasiveness in U87 glioblastoma cell lines by SPILLO-PBSS , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ermes Botte, Pietro Vagaggini, Joana Costa, Lara Faccani, Ilaria Zanoni, Anna Costa, Arti Ahluwalia, A novel in silico tool for dose assessment in cell culture nanotoxicology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michael Zanon, Désirée Baruffaldi, Marco Sangermano, Candido Fabrizio Pirri, Francesca Frascella, Annalisa Chiappone, Visible light-induced cross-linking of unmodified gelatin with PEGDA for DLP-3D printable hydrogels , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Roberta Nossa, Joana Costa, Ludovica Cacopardo, Arti Ahluwalia, Engineering a dynamic model of the alveolar interface for the study of aerosol deposition , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- A. Jötten, L. Kunze, L. Gleiter, P. Paulitschke, New non-invasive, label-free monitoring approach for 2D and 3D cell culture , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Claudio Ricci, Luisa Trombi, Ilaria Soriga, Fabio Piredda, Mario Milazzo, Cesare Stefanini, Luca Bruschini, Giuseppe Perale, Gianni Pertici, Serena Danti, Investigating the microenvironmental effects of scaffold chemistry and topology in human mesenchymal stromal cell/polymeric hollow microfiber constructs , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Ryan Conder, Leon H. Chew, Fisal Elstone, Marianne Lankhorst, Adam Añonuevo, Salvatore Simmini, Wing Chang, Allen C. Eaves, Terry E. Thomas, Sharon A. Louis, Organoid culture systems: Products supporting one of the biggest revolutions in biological research , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
