https://doi.org/10.4081/bse.154
Minimum performance level definition for bone plate testing according to standard: A preliminary study
Published: 29 September 2021
Abstract Views: 340
PDF: 267
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In silico modeling of osteosynthesis medical devices allows the reduction of the time required for experimental tests and the introduction of “simulation-driven designâ€. Using a wise combination of these techniques and analytical calculations, it is possible to relate the experimental results, which are mandatory for regulatory purposes, to the plate physiological application and prevent the occurrence of complications in the early stages after the orthopedic device implantation on humans and animals.
How to Cite
Bologna, F. A., Terzini, M., Lugas, A. T., & Audenino, A. L. (2021). Minimum performance level definition for bone plate testing according to standard: A preliminary study. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.154
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gianpaolo Serino, Andrea T. Lugas, Giacomo Bernava, Sara Ragazzini, Stefano Gabetti, Mara Terzini, Umberto Morbiducci, Alberto Audenino, Maurizio Pesce, Diana Massai, PDMS Substrates with tunable stiffness for cardiac mechanobiology investigation: A nanoindentation study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Marcello Miceli, Cecile Exertier, Beatrice Vallone, Marco Cavaglià, Marco A. Deriu, Elucidating molecular connection between IAHSP onset and Alsin protein by means of homology modelling and molecular dynamics , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michela Licciardello, Gianluca Ciardelli, Chiara Tonda-Turo, An in vitro lung biomimetic model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Gloria Ciniero, Francesco Gentile, Ahmed H. Elmenoufy, Emeline Cros-Perrial, Frederick G. West, Michael Weinfeld, Marco A. Deriu, Lars P. Jordheim, Jack A. Tuszynski, Targeting cancer drug resistance by modulation of ERCC1-XPF and p53 activity , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Paolo Milazzo, Roberta Gori, Alessio Micheli, Lucia Nasti, Marco Podda, In silico modeling of biochemical pathways , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- A. Bezze, G. Ciardelli, C. Mattu, In vitro human-relevant glioblastoma models as the novel frontier of nanomedicine screening , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Viola Sgarminato, Chiara Tonda-Turo, Gianluca Ciardelli, 3D in vitro model of the pancreatic acino-ductal unit through additive manufacturing technology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Daniele Bianchi, Daniele Bissacco, Maurizio Domanin, Santi Trimarchi, Rodrigo Romarowski, Stefania Marconi, Ferdinando Auricchio, Michele Conti, Coupling in silico and ex vivo porcine model for the evaluation of biomechanical impact of TEVAR , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Valeria Chiono, Approaching 3R teaching in biomedical engineering , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Alessio Malacrida, Mirko Rivara, Omar Ben Mariem, Alessandro Di Domizio, Giacomo Cislaghi, Mariarosaria Miloso, Valentina Zuliani, Gabriella Nicolini, Innovative 3D proteome-wide scale identification of ALKBH5 target for MV1035 small molecule able to reduce migration and invasiveness in U87 glioblastoma cell lines by SPILLO-PBSS , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
You may also start an advanced similarity search for this article.
