https://doi.org/10.4081/bse.146
Comparative analysis of different hydrogels for the bioprinting of 3D in vitro skeletal muscle models
Published: 29 September 2021
Abstract Views: 1661
PDF: 352
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
In this study we demonstrated an application of 3D Bioprinting using different commercially available hydrogels (CELLINK AB, Sweden) with the aim to identify the most suitable biomaterial for the proliferation and differentiation of murine muscle cells (C2C12).
How to Cite
Aliberti, F., Rinvenuto, L., Loi, G., Benedetti, L., Scocozza, F., Ronzoni, F. L., … Ceccarelli, G. (2021). Comparative analysis of different hydrogels for the bioprinting of 3D <em>in vitro</em> skeletal muscle models. Biomedical Science and Engineering, 2(1). https://doi.org/10.4081/bse.146
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Gabriele Ceccarelli, Martina Balli, Riccardo Bellazzi, Maurilio Sampaolesi, Gabriella Cusella, Rigenera protocol: Elucidation of the mechanisms involved in wound healing , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Elena Delgrosso, Gaia Martina Sarcinelli, Federica Riva, Federica Riva, Franca Scocozza, Michele Conti, Ian Postuma, Silva Bortolussi, Cinzia Ferrari, Bioprinting for osteosarcoma model: Methodological aspects and experimental applications , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michele Conti, Stefania Marconi, Ferdinando Auricchio, Biomechanical simulations and 3D printing for endovascular device testing , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Daniele Bianchi, Daniele Bissacco, Maurizio Domanin, Santi Trimarchi, Rodrigo Romarowski, Stefania Marconi, Ferdinando Auricchio, Michele Conti, Coupling in silico and ex vivo porcine model for the evaluation of biomechanical impact of TEVAR , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Monica Mattioli Belmonte, Giorgia Cerqueni, Francesco Biagini, Marco Calvigioni, Emanuele Russello, Nunzia Paglione, Francesca Montemurro, Emilia Ghelardi, Giovanni Vozzi, Bone and gut microbiota crosstalk: A novel 3D in vitro approach , Biomedical Science and Engineering: Vol. 3 No. 1 (2022)
- Francesca Ruini, Chiara Tonda-Turo, Stefania Raimondo, Pierluigi Tos, Pierfrancesco Pugliese, Stefano Geuna, Gianluca Ciardelli, Nerve guidance conduits based on bi-layer chitosan membranes for peripheral nerve regeneration , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Irene Carmagnola, Tiziana Nardo, Francesca Boccafoschi, Valeria Chiono, Layer-by-layer coating of stainless steel plates mediated by surface priming treatment to improve antithrombogenic properties , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Sara Tirendi, Stefania Vernazza, Sergio Saccà, Anna Maria Bassi, Assessment of an in vitro physiological relevant model to check therapeutic strategies for glaucoma , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Eleonora Messuti, Martina Giambra, Serena Redaelli, Andrea Di Cristofori, Carlo Giussani, Angela Bentivegna, V-ATPase as a mediator of treatment resistance in Glioblastoma Multiforme: an in vitro study to investigate new therapeutic strategies , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- P. Mancini, E. Botte, F. Biagini, C. Magliaro, A. Ahluwalia, Nebuloid: a novel in silico agent-based cell model , Biomedical Science and Engineering: Vol. 5 No. 1 (2024)
- Maurizio Lodi Rizzini, Paola Tasso, Anastasios Raptis, Miltiadis Matsagkas, Diego Gallo, Michalis Xenos, Umberto Morbiducci, Patient-specific modelling for the assessment of the hemodynamics risk of failure in endovascular aneurysm repair , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- M. G. Cascone, E. Rosellini, T. Butini, F. Barco, S. de Souza Lalic, F. d'Errico, Study of radiation effects through an innovative and alternative biodosimetric method based on the use of a plant organism , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Simone Borrelli, Giovanni Putame, Mara Terzini, Andrea Ferro, Stefano Marone, Cristina Bignardi, Alberto L. Audenino, Total and local experimental validation of a lumbar spine numerical model to enhance the orthopaedic management of spinal metastases , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- P. Signorello, L. Cacopardo, N. Guazzelli, I. Nicolai, A. Ahluwalia, Design and fabrication of an intestinal phantom , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
<< < 1 2 3 4 5 6 7 8 9 10 > >>
You may also start an advanced similarity search for this article.
