https://doi.org/10.4081/bse.115
Engineering a dynamic model of the alveolar interface for the study of aerosol deposition
Published: 14 February 2020
Abstract Views: 637
PDF: 349
Publisher's note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
Nano and micro particles are widely used in industrial, household and medicinal applications. To understand the interaction between particles and epithelial cells, we developed a dynamic model of the alveolar interface. This system, named DALI (Dynamic Model for the ALveolar Interface), is a modular bioreactor composed of two chambers divided by a porous membrane where epithelial lung cells are seeded. The membrane is the support of the alveolar barrier that separates the two compartments of the alveolus: the air and blood side. The system integrates the following elements: i) Air/Liquid interface, thanks to the two chambers divided by the membrane: ii) Cell culture media flow, thanks to the presence of a peristaltic pump; iii) Lung breathing motion, thanks to an airflow that allows the stretching of the membrane; iv) Aerosol deposition system, to study the effects of drug efficacy or particle toxicity on the epithelial layer; v) Quartz Crystal Microbalance, to quantify the amount of aerosolized particles.
How to Cite
Nossa, R., Costa, J., Cacopardo, L., & Ahluwalia, A. (2020). Engineering a dynamic model of the alveolar interface for the study of aerosol deposition. Biomedical Science and Engineering, 1(1). https://doi.org/10.4081/bse.115
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Ludovica Cacopardo, Joana Costa, Nicole Guazzelli, Serena Giusti, Sandro Meucci, Alessandro Corti, Giorgio Mattei, Arti Ahluwalia, Real-time cellular impedance monitoring and imaging in a dual-flow bioreactor , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Chiara Magliaro, Arti Ahluwalia, Clarifying mid-brain organoids: Application of the CLARITY protocol to unperfusable samples , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Licia Di Pietro, Alice Ravizza, Giovanni Vozzi, Andrés Diaz Lantada, Arti Ahluwalia, Carmelo De Maria, European regulatory framework for the clinical translation of bioprinted scaffolds and tissues , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Nicole Guazzelli, Ludovica Cacopardo, Arti Ahluwalia, Engineering magneto-responsive core-shell microbeads for mimicking peristalsis and alveolar breathing in vitro , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Piera Mancini, Ermes Botte, Chiara Magliaro, Arti Ahluwalia, Toward scalable in vitro models: a novel experimental and computational pipeline for the identification of cellular metabolic parameters , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Ermes Botte, Pietro Vagaggini, Joana Costa, Lara Faccani, Ilaria Zanoni, Anna Costa, Arti Ahluwalia, A novel in silico tool for dose assessment in cell culture nanotoxicology , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Arti Ahluwalia, The Italian Centro 3R: Mission and early achievements presented during the Second Annual Meeting , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
Similar Articles
- Michela Licciardello, Gianluca Ciardelli, Chiara Tonda-Turo, An in vitro lung biomimetic model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- D. Barozzi, F. Scagnoli, F. Mantegazza, F. Barbaglio, D. Ribezzi, S. Farè, B. Vergani, V. Berno, P. Ghia, C. Scielzo, Dynamic 3D culture promotes lymphoid tissue maturation and allows the study of Chronic Lymphocyitc Leukemia cells dissemination in vitro , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Irene Carmagnola, Tiziana Nardo, Francesca Boccafoschi, Valeria Chiono, Layer-by-layer coating of stainless steel plates mediated by surface priming treatment to improve antithrombogenic properties , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- A. M. A. Rando, L. P. Coppadoro, M. Poppa, C. Russo, S. Nicolò, M. Lombardi, C. Foglieni, G. B. Fiore, M. Soncini, Development of in vitro intestinal barrier model for predictive pre-clinical evaluations , Biomedical Science and Engineering: Vol. 4 No. 1 (2023)
- Eleonora Messuti, Martina Giambra, Serena Redaelli, Andrea Di Cristofori, Carlo Giussani, Angela Bentivegna, V-ATPase as a mediator of treatment resistance in Glioblastoma Multiforme: an in vitro study to investigate new therapeutic strategies , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Alessandra Aldieri, Mara Terzini, Diana Massai, Cristina Bignardi, Alberto Audenino, Development of an animal-free methodology for mechanical performance assessment of engineered skin substitutes , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Erica Zucchetti, Daniela Monti, Patrizia Chetoni, Silvia Tampucci, Susi Burgalassi, Reconstituted epithelial tissues and native cornea: A comparison of the influence of surfactants on ocular permeability , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Monica Boffito, Arianna Grivet Brancot, Ornella Lima, Simona Bronco, Susanna Sartori, Gianluca Ciardelli, Injectable thermosensitive gels for the localized and controlled delivery of biomolecules in tissue engineering/regenerative medicine , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Emanuele Gasparotti, Margherita Cioffi, Vincenzo Positano, Emanuele Vignali, Benigno Marco Fanni, Katia Capellini, Dorela Haxhiademi, Emiliano Costa, Sergio Berti, Luigi Landini, Simona Celi, Laura Gribaldo, Analysis of non-animal methods and models for research in cardiovascular disease , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Stefano Gabetti, Giovanni Putame, Federica Montrone, Giuseppe Isu, Anna Marsano, Alberto Audenino, Diana Massai, Versatile electrical stimulator for providing cardiac-like electrical impulses in vitro , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
