https://doi.org/10.4081/bse.114
Application of two in vitro methods for the toxicity test of autogenous vaccines
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article or claim that may be made by its manufacturer is not guaranteed or endorsed by the publisher.
Authors
According to the 3Rs principle (Replacement, Refinement, Reduction), this study aims to find alternative methods to evaluate the toxicity of autogenous vaccines. Currently in Italy the Istituti Zooprofilattici Sperimentali (II.ZZ.SS.) must perform the in vivo toxicity test for each lot of autogenous vaccine produced as laid down in the Decree of 17 March 1994. This paper describes two in vitro methods for assessing the toxicity of autogenous vaccines. The first is the MTT test based on the metabolic reaction of tetrazolium salt in vital cells. The second method is the test for measurement of IL-1ß production by macrophages, obtained after in vitro differentiation from pig monocytes in peripheral blood mononuclear cells. The two tests were performed on different vaccine antigens dilution: 1:20, 1:100 and 1:500. The results show a positive tendency between the two methods pointing out the potential of these methodologies combined for the replacement of the current in vivo test.
How to Cite
PAGEPress has chosen to apply the Creative Commons Attribution NonCommercial 4.0 International License (CC BY-NC 4.0) to all manuscripts to be published.
Most read articles by the same author(s)
- Maria Sampieri, Riccardo Villa, Silvia Dotti, Zebrafish as an alternative method for toxicological studies , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Giuseppe Guagliano, Manuela Legnardim, Cristina Volpini, Nora Bloise, Silvia Dotti, Riccardo Villa, Livia Visai, Paola Petrini, Drug-induced hepatotoxicity studied in a 3D, in vitro model of the liver , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Chiara Romano, Andrea Cacciamali, Silvia Dotti, Riccardo Villa, Health monitoring program for the control of laboratory animal diseases , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Andrea Cacciamali, Chiara Romano, Martina Angela Checco, Riccardo Villa, Detection of pathogens from environmental samples for the evaluation of the health status of laboratory animals , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Maria Sampieri, Erika Molica Colella, Silvia Dotti, Chilled storage of zebrafish embryos: Development of an efficient protocol , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
Similar Articles
- Danila Cianciosi, Lucia Regolo, Maurizio Battino, Francesca Giampieri, Effect of manuka honey on 5-fluorouracil chemosensitivity in colonspheres enriched with cancer stem (-like) cells , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Deyanira Contartese, Francesca Salamanna, Veronica Borsari, Stefania Pagani, Maria Sartori, Lucia Martini, Giovanni Barbanti Brodano, Alessandro Gasbarrini, Milena Fini, Development and characterization of a novel human 3D model of bone metastasis from breast carcinoma in vitro cultured , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Roberta Nossa, Joana Costa, Ludovica Cacopardo, Arti Ahluwalia, Engineering a dynamic model of the alveolar interface for the study of aerosol deposition , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
- Federico A. Bologna, Mara Terzini, Andrea T. Lugas, Alberto L. Audenino, Minimum performance level definition for bone plate testing according to standard: A preliminary study , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Elena Delgrosso, Gaia Martina Sarcinelli, Federica Riva, Federica Riva, Franca Scocozza, Michele Conti, Ian Postuma, Silva Bortolussi, Cinzia Ferrari, Bioprinting for osteosarcoma model: Methodological aspects and experimental applications , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Stefania Forciniti, Marta Cavo, Ilaria Dando, Elisa Dalla Pozza, Marta Palmieri, Loretta L. del Mercato, Promising 3D in vitro models for studying tumour heterogeneity and testing novel therapeutic approaches in pancreatic cancer , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Nicole Guazzelli, Ludovica Cacopardo, Arti Ahluwalia, Engineering magneto-responsive core-shell microbeads for mimicking peristalsis and alveolar breathing in vitro , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Michela Licciardello, Gianluca Ciardelli, Chiara Tonda-Turo, An in vitro lung biomimetic model , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Andrea T. Lugas, Gianpaolo Serino, Mara Terzini, Cristina Bignardi, Alberto L. Audenino, Development of a multiscale testing method for the reduction of soft biological tissues waste during mechanical characterization , Biomedical Science and Engineering: Vol. 2 No. 1 (2021)
- Claudio Conci, Emanuela Jacchetti, Tommaso Zandrini, Laura Sironi, Maddalena Collini, Giuseppe Chirico, Giulio Cerullo, Roberto Osellame, Manuela Teresa Raimondi, Quantification of the foreign body reaction by means of a miniaturized imaging window for intravital nonlinear microscopy , Biomedical Science and Engineering: Vol. 1 No. 1 (2020)
You may also start an advanced similarity search for this article.
